We are here to Sell, Rent, Teach, Service, and Satisfy all your Musical needs. Let us help YOU!
This bass cabinet is used but in good condition. It may show some cosmetic wear from normal use. There is some slight damage to one of the corners on the top of the cabinet, please see pictures. There is no major damage that will affect the sound or functionality. It has been checked over and everything is working properly.
*Please contact our shop if you are interested in shipping this cabinet.*
The VB™ series was designed from the ground up for the serious professional bass player. Voiced for strong bass with lots of harmonic tone, the versatility and performance of the VB™ 410 encourages use with any fine bass amp head.
The VB™ 410 is constructed using a premium grade of 12 mm Baltic Birch plywood with extensive internal bracing, and is covered with durable polyurethane HammerHead™ finish. The cabinet includes a black cloth grille with a wooden plywood frame for that warm musical “tone”.
The four 10” ferrite magnet woofers are designed with that rich bass tone in mind. The vented cabinet provides powerful bass, with every note propelled forward into the mix. The 10” special design woofers are a 32 ohm impedance, so they can all be wired in parallel; this assures a minimum of undesirable interaction between the woofers, as can happen when they are wired in series-parallel. A one inch diaphragm dynamic horn tweeter with level control rounds out the tone adjusting ability. A self-resetting protection circuit is incorporated into the tweeter crossover to help prevent damage to the horn tweeter due to long term overload power exposure. Once triggered, it will cut signal to the tweeter, and once the overload is removed, it will reset, allowing the tweeter to once again produce output. Inputs include two 1/4 inch input phone jacks, and one 4-pin twist-lock connector for maximum flexibility.
With a nominal impedance of 8 ohms, and a power handling of 800 watts program and 1600 watts peak, the VB™ 410 can be used in conjunction with any reasonably sized bass amp head. With the 8 ohm impedance, the VB™ 410 can be easily stacked with a VB™ 210 cabinet, resulting in a 4 ohm total load.
Be sure to check the amplifier specifications to verify the minimum impedance rating of the amp used to power the stacked pair of speakers.
This bass cabinet is USED. Please see images for appearance.
Blispay makes shopping at The Music Den even easier. It’s the only payment option that gives you:6 Months to Pay